New GY Imported Replacement Limited-Torque Series

Technical Description

• **Abstract:** This paper provides a technical introduction to the technology and application examples of torque-limited hydraulic transmissions. The GY series technical standards represent a new enterprise standard developed by referencing and adapting German standards, primarily targeting overseas engineering projects as well as the domestic high-end market for import substitution.
  【Keywords】Soft start, Flexible coupling, Semi-clutch, Torque limitation, Overload protection, Damping

  

  
  The GY series adopts German technical standards and offers several advantages over the traditional YOX series:
  ● Adopt higher sealing technology standards
  ● Oil-free for three years
  ● The main shaft employs TS technology: key areas feature a surface roughness of ▽0.2 and a surface hardness exceeding HV600.
  ● The spindle processed by TS technology features a microscopic surface structure that forms an oil-retaining grid. To reduce the friction coefficient and enhance the performance of dynamic sealing for skeleton oil seals.
  ● Adopt imported oil seals (temperature-resistant up to 200°C).
  ● Static seals (e.g., flanges) utilize a high-quality O-ring seal combined with specially formulated sealing adhesive (specifically designed for automotive transmission systems), providing a dual-layer sealing mechanism.

  

  
  ● Faster, stronger
  ● Utilizing high-quality bearings (SKF, FAG) for enhanced load-carrying capacity.
  ● Optional, professionally customized hydraulic transmission fluid can enhance power transmission by 5% to 15%.
  ● The rotating component is manufactured using dynamic balancing technology, ensuring more stable high-speed operation. The maximum operating speed is below 3000 rpm.

  

  
  ● Higher level of monitoring is achievable.
  ● Peripheral Infrared Temperature Monitoring Device
  ● Signal feedback can be integrated into centralized control.
  ● Conduct temperature monitoring to proactively identify overload trends.
  ● Contact capacity of alarm output: ~250V / 5A
  ● Output a 4–20mA signal corresponding to the output temperature.
  ● Temperature measurement range: 0~300℃
  ● Ambient temperature: 0~60°C. Relative humidity: 10~95% (non-condensing).
  ● Monitoring box dimensions: 300 x 250 x 150 mm, front-opening, wall-mounted design

  

  The U.S. Illinois-based environmental project utilizes a dual-drive shredder equipped with GY products featuring infrared temperature monitoring.

   

  
  ● Higher vibration value standards
  ● Advanced Manufacturing Techniques from Germany
  ● Vibration values can be as low as 2.5 mm/s.
  ● Reduce vibration during high-speed operation
  ● Reduce resonance in the drive unit
  ● Ensure the long-term, reliable operation of equipment such as motors, gear reducers, and conveyors.

  

  Supporting CMC's export to Malaysia's Manjung project, replacing the GY product originally supplied by Germany's VOITH.

  
  ● In addition to using spring washers, thread-locking adhesive is also applied for double security, ensuring enhanced safety.
  ● Aluminum alloy components are produced using full-metal die low-pressure casting technology, which is a leading-edge technique in China. Low-pressure cast aluminum alloy parts exhibit higher strength and more uniform material properties. The components are manufactured using ZL104 aluminum alloy that meets the GB/T 1173-1995 standard.
  ● Fasteners shall be standard components of Grade 8.8, treated with galvanization, black oxide coating, or Dacromet finish.
  ● The surface coating uses acrylic metallic protective paint that complies with the national standard GB/T25264—2010.

  

  GY Products Supporting MCC Sedi's Export Project to the Formosa Ha Tinh Steel Plant in Vietnam

  
  ● A better connection format
  ● GT High-Elastic Coupling (German Technology)
  ● Capable of flexible connection (permissible radial and axial displacement < 1 mm)
  ● Enhanced adaptability to overload and impact loads

  

  

  

  
  ◆ Technical Specification Sheet for GY-GT High-Elasticity Hydraulic Coupling Series
  ◆ The hydraulic coupling (hydraulic torque converter), which uses transmission oil as the medium for power transmission
  ◆ Should be equipped with a rear or side auxiliary chamber capable of cushioning the impact during startup of the working mechanism.
  ◆ Meets the soft-start requirements for the rated load of the working machine, with a maximum start-up time of 20″ to 50″.
  ◆ Temperature monitor for configurable hydraulic couplings, featuring a 4–20 mA output signal
  ◆ Configurable speed monitor for hydraulic couplings, outputting 4–20 mA signals
  ◆ In case of overload, it can relieve the load by melting the fusible plug and spraying oil (overload protection).
  ◆ The hydraulic coupling shall undergo dynamic balancing, with a grade of G6.3 (vibration value < 4.5 mm/s).
  ◆ Should be equipped with a highly elastic coupling (standard component) that offers excellent flexibility and load-bearing capacity for flexible connections.
  ◆ The replacement of the high-elasticity coupling should be simple and convenient, without the need to move the prime mover or the driven machine.
  ◆ Should be capable of withstanding 30% alternating torque over a long period.
  ◆ The hydraulic coupling shall be equipped with bearings of the same quality as those from FAG, SKF, and other reputable brands.
  ◆ The hydraulic coupling shall be equipped with a rubber dynamic seal capable of withstanding 200°C.
     ◆ Guangxing Brand Limited-Radius Fluid Coupling (Upgraded Import Substitution Version)
  ◆ Flexible Coupling (Torsional Vibration Isolation)
  ◆ Limited Torque Protection (Overrunning Clutch)
  ◆ Soft start (reducing inrush current and starting impact)
  ◆ Can be used for multi-drive applications

Main foundry business scope and capacity:

To cast 104-based aluminum alloy parts, HT150-250 cast iron parts, 45# steel-based various types of carbon steel castings. The production capacity of aluminum castings is 100 tons/month, and the production capacity of cast iron and steel parts is 100 tons/month. The company can provide customers with one-stop service of rough casting and processing. Mass production using die casting, small batch parts using sand casting.

Among them, cast steel (alloy steel) is the optimization and reorganization of the company's casting division and the original branch (Yunan Zhongxing Wear-resistant Materials Co., Ltd.) in 2023, fully combining the advantages of both parties, that is, the combination of technological innovation and mature management, aiming at common customer terminals, reducing marketing costs, and also allowing customers to obtain the convenience of one-stop after-sales service. The main products are related to electric power, mining, cement, ports, waterway dredging metal wear-resistant parts, product materials are metal matrix ceramic composite materials, high chromium, high manganese, alloy steel and so on.