welcome you to Guangdong Zhongxing Power Transmission Tech. Co.，Ltd. official website! professional manufacturer of hydraulic coupling!

English

Service Hotline

18122503991

13962817225

Home page

Product Introduction
Technical Parameter
Related Products
Product Message

Do you need a technical consultant to answer your questions?

Tel：181225039915

Email：gdzxps@163.com

DY Electro-Hydraulic Coupling Device

Product classification：

New DY Electro-hydraulic Drive

keyword：

New DY Electro-hydraulic Drive

frequency

power

transmission

regulation

coupling

Inquiry

Product Details

New DY Electro-Hydraulic Speed Control Soft Starter

A new technology for transmission & drive systems in high-power industrial machinery.

[Abstract] This article introduces the technology and application examples of speed-regulating hydrodynamic transmissions and electro-hydrodynamic drive systems, while also providing a comparison with mainstream conventional variable-frequency soft-start technologies. Electro-hydrodynamic transmission and drive technology is a new type of drive system that was introduced from Germany after 2010, incorporating and adapting advanced technologies. However, due to its relatively short time on the market, there remains limited design and operational experience in this field.
【 Keywords 】 Soft start, stepless speed regulation, flexible coupling, clutch, torque limitation, overload protection, and damping.

Preface
Since the 1980s, requirements for energy conservation, consumption reduction, and emission reduction have been placed on the agenda. To achieve these goals, methods such as adjusting motor frequency, voltage, and speed, as well as employing hydrodynamic transmission to modify the operating machinery's rotational speed, have been utilized in pursuit of energy-saving and emission-reducing outcomes. Electrical control methods include cascade-controlled thyristors, wound-rotor motors like DC motors and variable-frequency motors, which use inverters to regulate motor speed. Mechanical transmission approaches encompass the YOTC series of speed-regulating hydraulic couplings, hydroviscous speed regulators, CST soft starters, and magnetic couplings.

I. YOTC Series Speed-Regulating Hydraulic Couplings

After extensive comparative testing over an extended period, the YOTC series of speed-regulating hydraulic couplings have been widely recognized as the ideal solution for addressing soft starting, power balancing, and energy-saving requirements in equipment applications. Since their introduction to the energy-saving market in the 1980s, these speed-regulating hydraulic couplings have steadily gained prominence. Over the past three decades, an average of approximately 3,000 units have been annually introduced into the market, serving mechanical systems across industries such as power generation, steel production, coal mining, chemical processing, building materials, port operations, and transportation. As a result, these couplings have significantly enhanced operational efficiency and contributed substantially to energy conservation efforts in these critical sectors.

Principle of Operation for the YOTC Series Speed-Regulating Hydraulic Couplings

● The power transmission method of the YOTC coupler
The power unit drives the oil pump to rotate, causing the working fluid to be pumped into the coupling's working chamber. The pump impeller, functioning like a centrifugal pump, imparts kinetic and potential energy to the oil within the working chamber. As the oil rushes outward from the inner edge of the impeller toward its outer rim, it flows through the gap between the two wheels and reaches the turbine. The turbine, acting similarly to a turbomachinery device, converts the fluid energy carried by the oil as it moves radially—from the outer edge toward the center—into mechanical energy that drives the turbine. When the fluid flow returns to the pump impeller, it initiates the next cycle. In this way, the continuously circulating fluid transmits the motor's power to the driven machine.
● The speed control method of YOTC hydraulic couplings
When the equipment starts, the oil pump is driven by the gear on the input shaft to draw oil from the bottom of the coupling housing. The oil then flows through a water-cooled oil cooler and is injected into the working chamber via the inlet port.
When the coupling is operating, the oil flows out of the working chamber through channels along the outer edge of the turbine and enters the guide tube cavity. Inside the guide tube housing, there is a horizontally positioned guide tube that can extend radially in and out. (Refer to the accompanying figure for details.) The tip of the guide tube extends into the guide tube cavity, and its extension or retraction is controlled by an external electric actuator. The radial position of the guide tube's tip precisely determines the thickness of the oil ring within the guide tube cavity, which in turn regulates the amount of fluid filling the working chamber—and thus controls the output rotational speed. When the guide tube extends into the rotating oil ring, it draws oil from the guide tube cavity, reducing the thickness of the oil ring. This action removes oil from the working chamber and directs it toward the bottom of the housing for recirculation. Conversely, when the guide tube retracts, it increases the thickness of the oil ring, allowing more oil to remain in the working chamber. By using an external control mechanism to adjust the guide tube cavity between these two extreme positions—“full” and “empty”—the system achieves stepless speed variation of the output shaft. It is important to note that the tip of the guide tube must face the direction of rotation of the working oil.

YOT C Structure Schematic Diagram (with Illustration)

Advantages of the YOTC Series Speed-Regulating Hydraulic Couplings:
1. Enhance the starting capability of squirrel-cage motors by leveraging the motor's peak torque as the starting torque; also compatible for use with high-voltage motors.
2. Prevent power overload and protect the motor and working machinery from damage caused by excessive load.
3. Reduce vibrations and shocks during startup, enabling smooth start-up of the working machine.
4. The drive system enables power balancing and sequential starting, reducing the inrush current impact on the power grid.
5. The startup time of the working machine can be safely configured according to operational requirements.
6. The working machine features stepless speed regulation with high precision (1%), delivering remarkable energy-saving effects, achieving an energy-saving rate of 20% to 40%.
7. The work machine supports manual control, remote control, and automated operation, making it highly convenient to operate.
8. Insensitive to ambient temperature, with easy heat dissipation.
9. Simple in structure and highly reliable, it offers a lower price and reduced operating costs compared to variable-frequency speed control and CST speed controllers. Additionally, it features no mechanical wear, can operate effectively under harsh environmental conditions, requires minimal specialized maintenance, and boasts an exceptionally long service life.

II. Upgraded Electromechanical Integration Drive Technology Featuring Computer Control and Speed-Regulating Hydraulic Couplings (DYC, DY)
In high-power speed control applications and equipment requiring soft starting under heavy loads, the use of speed-regulating hydraulic couplings as transmission devices is an excellent choice. Firstly, they are widely favored for their reliability, durability, and low cost. However, due to the inherent nonlinear characteristics of hydraulic couplings themselves, it becomes increasingly challenging to meet the stringent demands for improved speed control performance in modern industrial settings. Secondly, many of the industries that rely on hydraulic couplings are large-scale mining and manufacturing enterprises with a high degree of automation. These companies not only have ever-increasing requirements for product quality and performance but also place significant emphasis on electrical integration, automation, and advanced process control. As a purely mechanical end-product, the hydraulic coupling alone cannot satisfy these advanced needs, thereby hindering its broader adoption in the market.
Currently, the hydraulic coupling control cabinets used in the market primarily rely on conventional, general-purpose instruments to manage and monitor the operation of the hydraulic couplings. However, these control cabinets are overly simplistic, with their electrical components merely passively supporting the operation of the hydraulic couplings without being integrally linked to them. As a result, they fail to play a critical role in optimizing the speed regulation performance.
To achieve this, the concept of electro-hydraulic (D&Y) electromechanical integration is employed. Leveraging today's advanced microcomputer technology, a dedicated intelligent control system has been developed and seamlessly integrated with the speed-regulating hydraulic coupling, creating a more efficient transmission and speed-control mechanism: the electro-hydraulic drive unit. This innovative system represents an organic combination of a specialized speed-regulating hydraulic coupling and a tailored intelligent control device. It not only retains the excellent transmission characteristics inherent to the hydraulic coupling but also endows the equipment with intelligent features, making it easier to operate and control.
The output speed of the electro-hydraulic transmission equipment maintains a nearly linear relationship with the given command, enabling stepless speed regulation. This system not only addresses the nonlinearity issues inherent in hydrodynamic coupling control but also leverages the advantages of high transmission power, low cost, and simple maintenance and operation. Additionally, it ensures that all auxiliary systems of the electro-hydraulic transmission equipment can automatically start or stop according to process requirements, supporting both local and centralized remote control operations.

(1) Adhering to the concept of electromechanical integration, we have seamlessly combined modern computer technology with traditional hydraulic couplings, introducing the innovative concept of electro-hydraulic transmission equipment. This approach effectively addresses the demands for soft starting and stepless speed regulation in high-power applications. Examples include variable-speed soft-start systems for high-power fans, pumps, elevators, coal crushers, mining machinery, and belt conveyors. Additionally, in scenarios involving multiple drives under heavy loads and high power requirements, these systems can be conveniently integrated into synchronized multi-drive control systems, such as the DYC (Dynamic Yaw Control) system used in multi-drive configurations for belt conveyors.
(2) At the core of the electro-hydraulic transmission equipment control system is an intelligent controller programmed in C language. Specifically designed to address the unique characteristics of fluid couplings, this controller integrates artificial intelligence with a fuzzy control algorithm derived from the combination of PID and AI techniques, thereby achieving highly effective control over the fluid coupling. All control functions are consolidated within a universal housing unit, ensuring intuitive operation that is both concise and practical. Additionally, in applications requiring advanced automation, the system can be seamlessly integrated into networked environments, enabling convenient remote monitoring and control.


On-site Universal Box Touchscreen Display Interface		Remote Computer Configuration Software Interface

• The new DYC electro-hydraulic flexible transmission and drive technology was introduced from Germany at the end of the last century. After nearly 20 years of absorption and transformation, it has now become a common enabling technology for the next-generation mechanical transmission and drive systems.
• Equipped with five major functions: Clutch, flexible coupling, soft start, stepless speed regulation, overload protection ；
• Capable of providing a one-stop solution to key challenges in mechanical transmission & drive systems: Overload soft start, dynamic load hazards, torque limitation, stepless speed regulation ；
• Compared to traditional mechanical transmission & drive technologies, it achieves more than 30% efficiency improvement (energy-saving, consumption reduction, and emission reduction).
• It is a more straightforward, cost-effective, and user-friendly mechatronic integration technology.

Has been successfully used for:
• Diesel-electro-hydraulic drive system for chain bucket dredgers (Soft start, stepless speed regulation)
• The drive system employs a diesel engine combined with DY electro-hydraulic power transmission and a gearbox (similar to the drive system used for coal-carrying belt conveyors).
• The rotational speed is reduced from 1200 rpm to 4 rpm via a diesel engine, passing through Gearbox #1, a belt-pulley assembly, Gearbox #2, and finally a chain-driven bucket mechanism. This represents a typical hybrid mechanical drive system incorporating belt, chain, and gear transmissions. The bucket operates at a frequency of 8–10 inches per cycle, generating high-density fluctuations in dynamic load with significant impact. As a result, the alternating torsional vibrations create extremely challenging operational issues. However, the adoption of a novel electro-hydraulic drive technology has successfully addressed these problems. Belt slippage, gear wear, spindle fracture, and black smoke from the diesel engine The issue demonstrates significant energy-saving effects.

• Applications of Multi-Point Drive Control (Hongguo Coal Transfer and Loading Station, Liupanshui, Guizhou)
• 8 00kW × 2 Belt Conveyor DY Electro-Hydraulic Dual-Drive Intelligent Dynamic Control System
• Features: Soft start, multi-drive power balancing, stepless speed regulation, flexible coupling, clutch mechanism, and overload protection

• High-power pump配套 (vertical pump, horizontal pump)
• Speed Control and Energy Saving System
• Laigang Wide and Thick Plate Plant
• 750 kW pump

• Formosa Ha Tinh Steel Plant's 2,800 kW Dust Removal Fan (750 rpm)
• Soft Start, Speed Control, and Energy-Saving System Unified

• Can be used for tube mills, vertical mills, and rotary kilns.
• Equipped with functions such as clutch operation, soft start, flexible coupling, stepless speed regulation, overload protection, and damping.

• Extensive applications across a wide range of mechanical equipment...

III. Upgraded Version of Computer-Controlled and Speed-Regulating Hydraulic Coupling (DYC, DY) – Electromechanical Integration Drive Technology

Project/Product	Hydrodynamic Speed Control Soft Start	Variable-frequency speed control soft start
1. Performance	1. Adjust the filling volume to achieve stepless speed regulation of the working mechanism. 2. Perform a soft start for the system, which can take an extended period of time with no limit on the number of starts. 3. High overload capacity, capable of utilizing the motor's peak torque, with strong heavy-load starting performance. 4. Multi-machine drive enables power balancing and features automatic control of speed and current.	1. Adjust the motor frequency for stepless speed control of the motor. 2. Perform a soft start for the system, which may take an extended period of time. 3. Poor overload capability—increasing the overload factor requires upgrading the frequency converter to a higher level, which would add several hundred thousand yuan in cost per upgrade level. 4. Adjusting the motor frequency enables power balancing.
2. Price	Low investment	Overall investment is high (requiring dedicated air-conditioned, ventilated, and dust-free electrical rooms as well).
3. Reliability	High reliability 1. Even if the control system fails, the device can still be operated manually. 2. Simple structure, no bypass system required	Low reliability 1. If any component in the complex control system of the frequency converter fails, the system will become inoperable. 2. The structure is complex, leading to lower reliability in high-altitude areas. Although the electrical components used in current variable frequency drives have improved in reliability compared to the past, the large number of components—often numbering in the thousands—in a typical large-scale VFD significantly reduces overall system reliability. Therefore, for critical applications, it is essential to have either a speed-control backup system or a fixed-speed bypass control system as a fail-safe measure.
4. Power Supply Fluctuations	Voltage fluctuations do not affect the operation of the coupler.	When the supply voltage drops below 80% of its rated value due to various reasons, the electronic inverter's built-in protection mechanism will automatically cut off the motor power supply. Even if the voltage drop lasts for just 100 microseconds, the protective action will still be triggered. While the inverter can be equipped with an automatic restart feature (requiring additional investment), the motor still needs at least 5 to 10 seconds to resume operation. During this period, the motor comes to a complete stop without power, potentially causing significant disturbances to the process system and even leading to a safety shutdown of the entire plant. In smaller power systems, voltage dips are particularly prone to occur.
5. Harmonic Impact	No harmonic interference	Electronic variable-frequency drives generate higher-order harmonics of current and voltage in the power supply system. The magnitude of these harmonics depends on the size of the drive, the specific type of inverter used, as well as the short-circuit capacity of the power supply system. In systems with low power supply capability—particularly those characterized by smaller electrical capacities—the harmonic interference becomes especially pronounced. Such interference includes: ● Additional losses are generated in the motor and power supply transformer (therefore, the motor must be selected slightly larger, typically by about 12%). ● Motors and transformers generate additional noise (2–5 dB[A]). ● In addition to generating normal driving torque, the motor will produce pulse torque (these torsional vibrations will also be transmitted to the working machine, increasing mechanical impact and energy loss). ● Harmonic interference leads to additional energy losses throughout the power supply system. ● Cause adverse effects on other electrical equipment and personnel, such as computers and controllers. ● Harmonic issues may arise in capacitor banks, voltage transformers, ballasts, or capacitors within the power supply system, leading to increased energy consumption. ● May require the installation of harmonic filters to mitigate the effects of harmonics (which will result in additional investment and maintenance costs).
6. Power Factor, Efficiency	High power factor, with an efficiency of 97–98%.	Low power factor and low efficiency—typically ranging only from 90% to 94%—often mislead users regarding the true performance of inverters. First, it is challenging (and highly costly) to accurately measure the efficiency of an inverter through load testing. Second, the additional losses caused by harmonics in motors, transformers, and the entire system are frequently overlooked. Third, the energy consumption associated with air conditioning cooling systems and harmonic filters is also not taken into account. Efficiency of inverters at different speeds: (Siemens’ Robicon Perfect Harmony series inverters)
6. Power Factor, Efficiency	High power factor, with an efficiency of 97–98%.
7. Matching Motors	Standard squirrel-cage induction motor	It must use a dedicated variable-frequency motor, whose rated current is 8–10% higher than that of a standard asynchronous motor, resulting in a 20% increase in temperature rise.
8. Voltage Transformation Requirements	Available high-pressure and low-pressure electric motors	If a low-voltage electronic frequency converter is used (since medium- and high-voltage converters are expensive and have lower reliability), a special step-down transformer must be employed, which inevitably leads to additional investment, increased floor space requirements, and higher maintenance demands. Alternatively, if a high-voltage motor is utilized—typically paired with a low-voltage frequency converter—a dedicated step-up transformer must be installed between the converter's output and the speed-controlled motor. This transformer must be rated for substantial capacity, as it needs to operate at frequencies below 50 Hz while preventing magnetic saturation during low-frequency startup.
9. Land Area	Smaller	The electrical switch room for high-power inverters requires significant space, leading to increased investment costs.
10. Electrical Cabinet Cooling System	No additional cooling required.	The heat loss generated within the inverter cabinet must be dissipated. This heat loss accounts for approximately 5% of the rated power, independent of the actual motor load and speed. For high-power inverters, this loss becomes particularly significant. The cooling air must be filtered by a dedicated cooling fan before being blown into the cabinet to maintain a cool operating environment. The maximum allowable temperature of the cooling air is 40°C, which necessitates substantial air circulation. As a result, the energy consumption associated with air conditioning and cooling fans often exceeds the inverter's own power losses.
10. Electrical Cabinet Cooling System	No additional cooling required.	Additionally, an air-to-water heat exchanger can also be used; however, this option requires significant investment and incurs high maintenance costs.
11. Electrical Cabinet Noise	None	The inverter generates significant noise. Large-scale inverters produce noise levels exceeding 85 dB(A).
12. Equipment Maintenance	General Mechanical Maintenance	Troubleshooting and maintenance are highly time-consuming and costly; therefore, to resolve the issue, it is essential to consult with experts from the supplier.
13. Spare Parts	Affordable mechanical spare parts	A large number of spare parts are required, and only the manufacturer can supply them. However, due to the rapid advancements and changes in electronic technology, some components will become obsolete within just a few years, making it increasingly difficult to procure them.
14. Packaging and Transportation	Standard Equipment Packaging	The costs associated with factory testing, packaging, transportation, installation, and equipment startup are extremely high. Typically, these expenses are not factored into the comparison of equipment prices—nor are the costs for training maintenance personnel and organizing product documentation.
15. Additional Cables	No need.	If low-voltage motors are used in conjunction with low-voltage variable frequency drives, the connection cables between the step-down transformer and the input terminals of the VFD, as well as between the output terminals of the VFD and the speed-regulated motor, must be connected in parallel using multiple cables (e.g., four cables rated for 1000 A). Additionally, these cables should be terminated in a dedicated junction box specifically designed for motor wiring. During motor maintenance, all such connections must be disconnected, which can be a challenging task due to the large diameter of the cables. Furthermore, significant heat losses occur within these cables, thereby reducing overall system efficiency.
16. Lubrication System	The hydraulic coupling is equipped with a lubrication system that provides lubricating oil to the bearings of both the motor and the working machine.	Large high-speed motors typically use sliding bearings instead of rolling bearings. Motor sliding bearings, as well as pump bearings, require regular maintenance. These sliding bearings must be supplied with oil for lubrication, necessitating the installation of a separate lubrication system—adding both additional costs and maintenance requirements.
17. Frequency Conversion Method	There is no such requirement.	There are essentially two types of frequency converters: voltage-source inverters and current-source inverters. Voltage-source inverters have lower efficiency and generate more higher-order harmonics compared to current-source inverters. If no motor is connected to the output terminal of a current-source inverter, the inverter will be running under no-load conditions. Under such circumstances, it cannot perform operational tests or trial runs, nor can faults be identified or diagnosed, as these functions require a loaded condition. This limitation becomes particularly inconvenient when a motor is not available at the moment, the motor has not yet been prepared, or for reasons related to factory operations that prevent the inverter from being put into operation.
18. Control System	Adopt a simple on-site control system, featuring on-site/remote/automatic/manual operation modes.	The frequency converter requires the arrangement of additional control and monitoring equipment in the switchgear room where the converter is installed. This means that extra cables, relays, internal interlocking systems, and starting procedure devices must be added to meet the control requirements, thereby increasing costs, failure rates, and maintenance workload.
19. Explosion-proof Requirements	Speed-regulating hydraulic couplings all come with underground safety certification.	Meeting explosion-proof requirements involves significant cost expenditures and is relatively difficult to achieve.

From the comparison above, it is evident that both hydraulic speed control soft starters and variable-frequency drive soft starters can achieve soft starting and multi-drive power balancing. However, as shown in the comparisons from point 2 to point 19, the use of a variable-frequency drive system is more complex, involves additional drawbacks, has a shorter service life, and incurs higher management and operational costs.

IV. Energy Efficiency Comparison Between Variable Frequency Soft Start and Hydraulic Soft Start
DY Electro-Hydraulic Energy-Saving Drive System, featuring a rated transmission efficiency of 97–98.5%. It produces no electromagnetic or electrostatic interference. Powered by standard industrial frequency electricity, this system is designed to work seamlessly with asynchronous energy-saving motors, creating an ultra-high-efficiency drive solution that delivers even greater energy savings. Variable-frequency speed control utilizes a variable-frequency motor, which, at rated operation, draws 8–10% higher current and experiences a temperature rise that is 20% greater compared to standard asynchronous motors. Additionally, the heat generated by the inverter itself amounts to 50–60 watts per kilovolt-ampere of capacity, resulting in extra energy consumption when compared to using a power supply operating at line frequency. Additionally, to enhance the reliability and stability of inverter operation, extensive auxiliary peripheral electrical equipment must also be configured, including transformers, power circuit breakers, AC contactors, filters, reactors, braking resistors, and more. These electrical configurations collectively account for a power consumption exceeding 5%. It is evident that, compared to the DY electro-hydraulic energy-saving drive system, the variable-frequency drive system exhibits higher overall energy consumption and lower efficiency under rated operating conditions.

V. The DY electro-hydraulic drive unit also features excellent flexible transmission characteristics.
DY electro-hydraulic flexible transmission and drive technology not only delivers excellent drive control performance but also leverages the unique advantages of hydraulic flexible transmission. By optimizing the start-up and operational characteristics of the working machinery, it effectively mitigates the risks associated with dynamic loads—such as torsional vibrations, resonance, and overloads—while significantly reducing operational maintenance costs. Additionally, this technology minimizes redundancy in the configuration of transmission and drive systems, thereby lowering overall investment expenses.
1. By altering the resonant speed of the shaft system, a larger torsional angle based on torque (indicating lower stiffness) results in smaller impact torque and a lower resonant speed. The torsional stiffness of the hydraulic coupling device is adjustable, allowing it to operate at an optimal torsional angle (slip) according to the varying load torque, thereby minimizing resonance.
2. Reduces torsional vibrations in the shaft system, making it particularly suitable for operating conditions with frequent load variations. The hydraulic coupling device uses 30–40# turbine oil as the transmission medium, providing significant viscous damping (increasing frictional resistance). Capable of rapidly attenuating vibrations, converting the energy of torsional oscillations into heat, and dissipating it through thermal radiation. This will help reduce mechanical impact and wear in the transmission shaft system, enhancing reliability and extending service life.
3. When equipment operation is subjected to unexpected overloads, it often leads to damage of the transmission system or other mechanical components. If a hydraulic coupling device is employed in the drive shaft system, Leverage its clutch (semi-clutch) function By interrupting the transmission torque or limiting torque transfer, a safety protection function can be achieved.
4. The DY electro-hydraulic drive features a clutch function, enabling the motor and working machine to start independently. This clutch characteristic ensures that the motor can initiate operation under both no-load and heavy-load conditions, allowing for full-voltage starting of the motor. As a result, startup time is significantly reduced, and the inrush current is minimized—eliminating the need to address the common issue of "using an oversized motor for a smaller load." After the motor starts and reaches its rated speed, the system gradually engages the working machine via precise adjustment of the hydraulic coupling, achieving a smooth and stepless startup process ranging from 0% to 100% speed control. Traditional variable-frequency control relies on conventional V/f control, where the voltage drop across the motor increases relatively as the motor speed decreases. This, in turn, leads to insufficient excitation, causing the motor to fail to generate adequate rotational torque. Under heavy-load conditions, it becomes necessary to equip the motor with a capacity margin of 1.5 times or more; otherwise, the motor may lack sufficient power during startup.

Through the comprehensive comparison outlined above, the new DYC electro-hydraulic speed-regulating soft-start device technology can replace current conventional variable-frequency drives and CST drives. It offers superior performance, requires lower equipment investment costs, achieves higher operational efficiency, and incurs lower operation and maintenance expenses—making it a more suitable and advanced technology for industrial machinery transmission and drive systems.

Main foundry business scope and capacity:

To cast 104-based aluminum alloy parts, HT150-250 cast iron parts, 45# steel-based various types of carbon steel castings. The production capacity of aluminum castings is 100 tons/month, and the production capacity of cast iron and steel parts is 100 tons/month. The company can provide customers with one-stop service of rough casting and processing. Mass production using die casting, small batch parts using sand casting.

Among them, cast steel (alloy steel) is the optimization and reorganization of the company's casting division and the original branch (Yunan Zhongxing Wear-resistant Materials Co., Ltd.) in 2023, fully combining the advantages of both parties, that is, the combination of technological innovation and mature management, aiming at common customer terminals, reducing marketing costs, and also allowing customers to obtain the convenience of one-stop after-sales service. The main products are related to electric power, mining, cement, ports, waterway dredging metal wear-resistant parts, product materials are metal matrix ceramic composite materials, high chromium, high manganese, alloy steel and so on.

DY Electro-Hydraulic Coupling Device